1. Home
  2. /
  3. Products
  4. /
  5. UHF RFID Four Port...

UHF RFID Four Port Fixed Reader

It is a four port UHF RFID fixed reader, which embeds the M2240 module. Its communication interfaces can be USB, RS485, RS232, and 100M Ethernet, etc.. It has four TNC antennae interfaces. Aluminium alloy of the whole body makes this reader more rugged and durable as well as the excellent heat dissipation capability,

The description of UHF RFID Four Port Fixed Reader

It is a four port UHF RFID fixed reader, which embeds the M2240 module. Its communication interfaces can be USB, RS485, RS232, and 100M Ethernet, etc.. It has four TNC antennae interfaces. Aluminium alloy of the whole body makes this reader more rugged and durable as well  as the excellent heat dissipation capability, antijamming capability and lightning-proof ability.

It is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc..

Product Advantage:

Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field make this module more suitable for harsh application environment.

Remarkable performance, can achieve a reading distance over 8m for single tag reading with 8dbi RF antenna.

Remarkable performance in intensive taps reading can attain a tags identification rate of 400tags/s.

Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.

Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.

The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider.

Provide four TNC antennae interfaces, users can achieve superior reading performance with less equipment deployment.

Enhanced noise suppression function for reliable data capturing.

High precision return signal strength (RSSI).

Excellent performance of anti-interference and lightning-proof design.

Aluninium alloy enclosure, rugged and durable, remarkable performance of heat dissipation.

Aesthetic appearance, easy to install.

The key-parameter of   UHF RFID Four Port Fixed Reader

 

Name Parameters Remark
Reader Chip R2000
Tag Protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency 840~960MHz
Supporting Working Area China, Europe, the United States, South Korea, Japan, Taiwan……
Operating Voltage 12V DC power supply
Maximum operating current 1A Test of transmit power in 30dBm state
Standby current ≤80mA
RF port maximum output power 1W(30dBm)
Working Temperature -25℃~+65℃
 Working Humidity ≤95%(+25℃)
Storage Temperature -40℃~+80℃
Receiving -82dBm
Antenna interface impedance 50Ω
Serial communication parameters Baud rate adjustable(default 115200bps),parity bit:0 ,

data bit:8 ,stop bit:1

Power output settings 5~30dBm adjustable /Adjustable minimum interval of 1dBm

(default 30dBm)

DRM mode support
RSSI support
High temperature automatic protection function support
Power supply enable support
GPIO interface 3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer 

 

buzzer support
LED lights Power indicator: Red

Status indicator: Green

Communication Interface USB、RS232、RS485、Ethernet Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time.
Antenna interface Four TNC The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time.
 dimension 26.5*25.0*4.5CM(including bracket)
Accessories 12V/3A Power Adapter:1

Serial line: 1 root

Pin NO. Name Description Remark
1 485-B RS485 B
2 485-A RS485 A
3 EN_OUT Equipment enable control interface,When the high level input, the device will be in a state of sleep。The high level voltage is 5V。
4 GPIO1 GPIO port output, can be programmed to control the level of output。The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V)
5 GPIO2 the same as above
6 GPIO3 the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control)
7 NC Reserved interface, no function
8 NC Reserved interface, no function
9 WIFI_RESET Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.
10 GND Signal reference。

 

image5

Latest News

get in touch now

We Deserve Your Trust